We offer direct wholesale to consumer pricing and guarantee the lowest prices on the best brands

1-888-344-4949

STORE HOURS: Monday - Friday 7 AM - 3 PM PST


Search
0 items in cart | Total: $0 View Cart
This part fits vehicles with your year, make and model. Please click the Fitment tab below and confirm your engine, chassis and transmission.

Shopping for a different vehicle? To make sure this part fit your vehicle Check The Fit

To make sure this part fit your vehicle Check The Fit

Attention! This part may not fit your vehicle!
To make sure this part does fit your vehicle Check The Fit

Brake Master Cylinder - Cardone/a-1 Cardone - Remanufactured Master Cylinder (Part Number: 10-1738)

  • Price:   $  28.71

  • Availability: In Stock


Check The Fit

Customers also purchased

Product Details

Manufacturer:
Cardone/a-1 Cardone
Part Number:
10-1738
Manufacturer Part Number:
10-1738
Description:
Brake Master Cylinder
Long Description:
Remanufactured Master Cylinder
Part Type:
Brake Master Cylinder
Category:
Brake
Subcategory:
Brake Hydraulics
Sales Rank:

Technical Details

Core Price:
  $  7.20
Condition:
Remanufactured
Product Fit:
Direct Fit
Weight:
4 lbs.
Height:
4.625"
Width:
5.5"
Length:
5.5"
UOM:
EA
Quantity Sold:
Sold individually
Qty Per Application:
1
Minimum Order Qty:
1
Item GTIN:
082617006071
Item Location:
Las Vegas, NV

Specifications

E-Waste
No
FAQ Q10 A
Most likely, the fluid in the system is contaminated. The most common form of contamination occurs when petroleum-based fluid has been accidentally introduced into the brake system. If that has happened it is almost certain that all rubber components in the brake system (hoses, seals, bladders) will need to be replaced after the system is thoroughly flushed. If the contamination is due to moisture, rust and/or dirt, it might be possible to restore operation by flushing the system and replacing the brake fluid with fresh, clean fluid. Always use the manufacturer-recommended brake fluid from a sealed container.
FAQ Q11 Q
How can I test a master cylinder to see if it's bypassing?
Troubleshooting Tip
Leaks
Bore Diameter (N)
0.945^
FAQ Q11 A
Simply plug the master cylinder ports and press the brake pedal. If the master cylinder is bypassing, the pedal will go down. If the pedal stops hard, the master cylinder is OK.
FAQ Q8 Q
What causes the car to pull to one side during braking?
FAQ Q9 A
Replace all brake fluid. Brake fluid is hygroscopic which means it absorbs moisture. Too much water in brake fluid will cause vapor lock and apply pressure to the wheels. Also check for proper push rod adjustments and stop light/cruise control switch adjustments.
Mounting Hole Quantity
2
Reservoir Material
Plastic
Reservoir Type
Assembled
Troubleshooting Tip
Inoperable brake pedal
FAQ Q6 Q
The brake pedal is low and spongy. Is it a bad master cylinder?
Troubleshooting Tip
Brake pedal slowly travels to the floor
FAQ Q1 A
As a rule, always use the brake fluid recommended by the O.E. which is stamped on the master cylinder lid. Note: Always use new fluid from a sealed container.
FAQ Q3 A
The first step to bench bleeding a step bore is to slowly depress the master cylinder piston, then release slowly and wait 20 seconds before depressing again. NEVER pump piston/pedal with a step bore style master cylinder. Follow the same process on the vehicle.
FAQ Q4 Q
My original master cylinder leaked out of the back of the piston into the booster area. Why?
FAQ Q5 A
The master cylinder is working correctly. Check for a faulty brake booster or frozen wheel cylinder/caliper.
FAQ Q6 A
First, check for air in the system. Make sure master cylinder is level when bleeding. Air will compress in a hydraulic system causing a low pedal. Then, check for brake hose swelling or expanding under pressure. Next, check brake drums/discs for proper specifications. Finally, check brake material.
Package Contents
Master Cylinder
Primary Port Size
1/2 x 20
Reservoir Included
Yes
Troubleshooting Tip
Abnormal brake pedal feedback
Troubleshooting Tip
Brake warning light illuminated
FAQ Q2 Q
What's the difference between Dot 3, 4 and 5?
FAQ Q7 A
This is caused by a problem with the caliper or a brake hose.
FAQ Q7 Q
One side of my front brakes won't release, why?
Product Condition
Remanufactured
Troubleshooting Tip
Excessive pedal travel
FAQ Q2 A
Dot 3 and 4 are Glycol-based fluids and Dot 5 is a silicone-based fluid.
FAQ Q4 A
Check booster for a defective push rod seal. If this seal is bad, it could drain the brake fluid out of the master cylinder.
Maintenance Info
The following tips will help maintain the proper operation of this part:
Maintenance Info
To ensure proper brake system performance, it is advised that brake fluid and hoses be inspected every 10,000 - 15,000 miles. Refer to a vehicle specific service manual for fluid replacement intervals. Most manufacturers recommend replacing the fluid every 2 years.
Master Cylinder Material
Cast Iron
FAQ Q3 Q
Does a step bore style master cylinder require a specific bleeding process?
FAQ Q5 Q
I replaced the master cylinder and now the pedal is high and hard. Why?
Master Cylinder Color/Finish
Gray
FAQ Q1 Q
What type of fluid should I use: DOT 3, DOT 4 or DOT 5?
FAQ Q10 Q
Why is the piston stuck inside the bore of my master cylinder?
FAQ Q8 A
Check the steering and suspension. Inspect both calipers for binding or sticky slides or pins. Check brake lining for oil/grease or uneven wear. Inspect brake hoses for restriction. Check for proper tire pressure.
FAQ Q9 Q
What causes the brakes to lock up after only a couple of miles?
Troubleshooting Tip
Check engine light illuminated on modern vehicles
Secondary Port Size
9/16 x 18
Installation Hardware Included
No
Port Count
2
Troubleshooting Tip
Common signs of wear indicating replacement may be required:
Troubleshooting Tip
Contaminated fluid
Product Line Marketing Stmt
CARDONE Industries, Inc. is the remanufactured parts supplier to the O.E.Ms. We are the only remanufacturer in the world with over 45 years' experience in mechanical, hydraulic and electronic parts repair. Through reverse-engineering, our product engineers are able to determine where - and why - original parts fail. We re-engineer our A1 CARDONE(R) Reman parts for stronger, longer-lasting performance. We build it better. Learn more at Cardone.com.
Product Description - Invoice
Reman. Master Cylinder
Label Description
Remanufactured Master Cylinder
AAIA Part Type Description
Brake Master Cylinder
UN/SPSC Description
Master Cylinders/Tools - New & Reman
Application Summary
Buick Century 1980-78, Regal 1980-78 Chevrolet El Camino 1980-78, Malibu 1980-78, Monte Carlo 1980-78 GMC Caballero 1980-78 Oldsmobile Cutlass 1980-78, Cutlass Calais 1980-78, Cutlass Cruiser 1980, Cutlass Salon 1980-78, Cutlass Supreme
Marketing Description
CARDONE Remanufactured Master Cylinders are re-engineered, built and tested to match O.E. performance. Each unit features new, O.E.-quality seals and cups to ensure leak-free, long-lasting performance. Cast-iron master cylinders are treated with a premium protective coating to minimize rust and extend product life. All units are 100% computer tested to ensure perfect fit and function.
Short Product Description
Master Cylinder
Key Search Words
Master Cylinder, Brake Master Cylinder, MC, Master, Cylinder
Life Cycle Status Description
Available to Order
SDR Required Flag
N
Warranty Distance UOM
MI
Warranty Time
36
CTO
MX
Life Cycle Status Code
2
Remanufactured Part
Y
Warranty Special UOM
TX
National Popularity Description
Next 20% of Product Group Sales Value
Pallet Layer Maximum
3
Maximum Cases per Pallet Layer
71
Warranty Distance
36000
Warranty Time UOM
MO
Harmonized Tariff Code (HTS)
8413500070
Emission Code
1

The CARDONE/A-1 CARDONE Brake Master Cylinder contains no remanufactured components, and is designed to operate in either city or highway driving.

Year Make Model Engine Notes
1980BuickCentury3.8LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980BuickCentury3.8LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980BuickCentury4.3LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980BuickCentury4.9LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980BuickCentury5.0LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980BuickRegal3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980BuickRegal3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980BuickRegal4.3LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980BuickRegal4.9LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980BuickRegal5.0LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletEl Camino3.8LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletEl Camino3.8LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletEl Camino4.4LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletEl Camino5.0LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletMalibu3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletMalibu3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletMalibu4.1LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletMalibu4.4LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletMalibu5.0LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletMalibu5.7LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletMalibu5.7LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletMonte Carlo3.8LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletMonte Carlo3.8LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletMonte Carlo3.8LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletMonte Carlo4.4LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980ChevroletMonte Carlo5.0LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980GMCCaballero3.8LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980GMCCaballero3.8LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980GMCCaballero4.4LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980GMCCaballero5.0LSupplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass3.8LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass4.3LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass5.0LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass5.7LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Calais3.8LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Calais4.3LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Calais5.0LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Calais5.7LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Cruiser3.8LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Cruiser4.3LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Cruiser5.0LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Cruiser5.7LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Salon3.8LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Salon4.3LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Salon5.0LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Supreme3.8LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Supreme4.3LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Supreme5.0LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980OldsmobileCutlass Supreme5.7LGAS, Power Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacGrand Am4.9LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacGrand Am5.0LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacGrand LeMans3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacGrand LeMans3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacGrand LeMans4.3LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacGrand LeMans4.4LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacGrand LeMans4.9LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacGrand LeMans5.0LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacGrand Prix3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacGrand Prix4.3LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacGrand Prix4.9LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacGrand Prix5.0LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacLeMans3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacLeMans3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacLeMans4.3LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacLeMans4.4LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacLeMans4.9LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1980PontiacLeMans5.0LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickCentury3.2LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickCentury3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickCentury3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickCentury3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickCentury4.9LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickCentury4.9LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickCentury5.0LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickCentury5.7LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickRegal3.2LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickRegal3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickRegal3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickRegal3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickRegal4.9LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickRegal4.9LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979BuickRegal5.0LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletEl Camino3.3LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletEl Camino3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletEl Camino3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletEl Camino4.4LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletEl Camino5.0LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletEl Camino5.7LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletMalibu3.3LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletMalibu3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletMalibu3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletMalibu4.1LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletMalibu4.4LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletMalibu5.0LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletMalibu5.7LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletMalibu5.7LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletMonte Carlo3.3LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletMonte Carlo3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletMonte Carlo3.8LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;
1979ChevroletMonte Carlo4.4LPower Brakes;Supplied w/Reservoir; Qty needed per vehicle: 1 ;


BRAKEWAREHOUSE PRODUCT WARRANTIES

A Solid Warranty Ensures Quality and Reliability!

Unlike other companies that hide their product warranties or beat around the bush with them, we are so confident about the quality of our products that we offer and display the best product warranties anywhere! We believe that a solid warranty ensures the reliability and service that our products are meant to deliver. Our Warranties are simple, and we stand behind them one hundred percent.



Premium Dimpled & Slotted Brake Rotors

One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.
One Year, 12,000 Miles Warranty Against Warping and Cracking. Unlimited mileage.

Performance Cross-Drilled & Slotted Brake Rotors

One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.
One Year, 12,000 Miles Warranty Against Warping and Cracking. Unlimited mileage.

Performance Slotted Brake Rotors

One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.

One Year, 12,000 Miles Warranty Against Warping and Cracking. Unlimited mileage.



Performance Cross-Drilled Brake Rotors


One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.
One Year, 12,000 Miles Warranty Against Warping and Cracking. Unlimited Mileage.

Brake Pads and Brake Shoes

One Year, 12,000 Miles Warranty Against Materials and Workmanship Defect.Unlimited Mileage.

Replacement Plain Brake Rotors (Premium and Standard)

One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.
One Year, 12,000 Miles Warranty Against Warping and Cracking.

Premium Brake Drums

One Year Against Materials and Workmanship Defects.
One Year, 12,000 Miles Warranty Against Warping and Cracking.

Stainless Steel & Replacement Brake Lines

One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.

Replacement Brake Calipers (With and Without Brake Pads)

One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.

Powder Coated Brake Calipers

One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.

Master Cylinders

One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.

Wheel Cylinders


One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.

Brake Boosters

One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.

Brake Sensor Wires

One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.

Disk Brake & Drum Hardware Kits

One Year, 12,000 Miles Warranty Against Materials and Workmanship Defects.

Materials & Workmanship Defects

This covers any products that are structurally compromised or weakened because of structural failure.

Warranty Does Not Cover

Zinc plating, rusting, pitting, corrosion due to de-icing agents used (Modern de-icing agents used by a lot of municipalities is EXTREMELY corrosive and deteriorates metal), cosmetic damages, normal wear and tear or damage caused by negligence, lack of maintenance, accident, abnormal operation, track racing, improper installation or service. Do not use any cleaning solutions of any kind on Zinc Plated Brake Rotors because this will cause a chemical reaction which will remove the Zinc Coating. Brakewarehouse will not replace any Brake Rotors due to the damage caused by the use of cleaning solutions on Zinc Plated Brake Rotors.This warranty does not cover Brake Rotor Wheel Bearings (Which includes Wheel Bearing Assembly and Spindle Nut), because of inherent issues with the vehicle. Because many vehicles inherently have ongoing problems,No more than one (1) warranty claim is allowed per customer.The warranty is limited only to the original purchaser and is nontransferable. Under NO circumstances will our liability exceed the amount of the original sale. This warranty does not cover any labor or materials which may be necessary to remove a product or install a replacement product, airfreight charges, or towing expenses. Brake pad warranty does not cover brake noise or normal wear and tear. Some brake pad systems cause pads to wear faster than others. Noise can be caused by a number of reasons, Brake Pad dust build-up, faulty hardware, pad residue built up on the rotor surface or Brake Calipers not functioning correctly. Our warranty does cover materials and workmanship defects. This warranty is limited to the exchange of the product only, when returned in accordance with these terms and conditions of sale. Warranty replacement for warped brake rotors and brake drums does not include brake pads and is not covered for refund. Brakewarehouse will not be liable for any loss, damage, cost or expense, including without limitation any incidental or consequential damages of any kind, including those arising from personal injury, property damage or lost profits, whether based upon breach of warranty or contract, negligence or strict product or other tort liability, arising directly or indirectly in connection with the design, manufacture, sale, use or repair of the products (either separately or in combination with any other product or material) or from any other cause, other than for the cost of replacement of the product covered in this warranty. In no event will Brakewarehouse be liable to purchaser for more than the purchase price of the product. Return shipping costs to Brakewarehouse for all claims will be paid by buyer. Upon placing an order, you have agreed to all of Brakewarehouse's Policies, Warranties and Terms and Conditions.

Warranty Claim

Warranty is valid from date of purchase, provided that the product has not been subject to abuse or misuse in its use or installation, or has not been subject to modification or alteration. Products must be installed as supplied in matching sets and must be in accordance with the vehicle manufacturer's instructions. All warranty claims require proof of purchase and must be approved by an authorized representative of Brakewarehouse. Customers must provide an order number and copy of Invoice/Receipt when making a claim. If you receive an item that is broken, defective or incorrect due to a data error, and has not been used or assembled within 30 days of purchase, Brakewarehouse will provide a prepaid return shipping label. Customer will be responsible for return shipping on any Brake Rotors and Brake Drums that are warped or cracked in order to receive a replacement and they are not covered for refund. Warped or cracked rotors and Drums must be sent back to Brakewarehouse before a replacement set will be sent out to the customer. Upon receipt of product, any shipping charges both ways for any cancellations, returns or warranty claims outside the Continental USA will be the responsibility of the customer. Brakewarehouse under NO circumstance will pay for any shipping costs outside the Continental USA.

No Warranty On Any Products Used For Commercial Vehicles or Racing

Although every effort has been made to research, develop and test our brake materials for high performance use, no warranty exists on products used on race tracks or for competition use of any kind. Users must satisfy themselves by meticulous testing as to the suitability of any particular grade of braking material with regard to performance, durability, and its suitability for their chosen class of racing.

Brakewarehouse neither makes nor implies any other product warranty or suitability for purpose other than that expressly declared here. To the extent that any salesperson has made any oral statements to the purchaser about the product, such statements are not warranties, should not be relied on by the purchaser, and are not part of the contract of sale. No salesperson is authorized by Brakewarehouse to modify or add to this warranty. The product warranty above is the only warranty provided to purchaser. This warranty is in lieu of any other warranty, expressed or implied, including but not limited to, any implied warranty of merchant ability or fitness for a particular purpose.

Return Instructions for Warranty Defects:

Please note when returning an item for a warranty defect, please follow these instructions:

  • * Returned item must be original packaging.
  • * Must have original manufacturer information.
  • * May not show misuse or modification.
  • * Are not damaged due to incorrect installation.
  • * Do not have missing parts, hardware or instructions.


Can't find what you are looking for? Try searching by one of these methods below.