|
Brembo Standard Brake Rotors
|
- Brembo quality in OE replacement brake rotors
- fully compatible with your vehicle’s original brake system
- designed to equal or exceed the performance of your OE rotors
- start with casting from Brembo foundry
- machined to exacting tolerance (rotor run-out tolerance = 0.0025”)
- feature a braking surface finish (ground or fine turned) compatible with OE specifications
- electronically balanced to minimize vibration
|
Brake Parts Catalog |
Brembo Sport Drilled Brake Rotors
|
- improve the looks & performance of your original braking system
- excellent stopping power in everyday traffic & high-performance street & highway driving
- not recommended for track use or intended to be used with race compound brake pads on the street
- compatible with OE rotor specifications
- fully compatible with hubs, brake calipers & tires
- utilize 1-piece vented or solid rotors consistent with OE specs
- cross-drilled holes are bi-angled chamfered at rotor’s outer surfaces to help reduce cracking caused by repeated, high stress, high temperature brake applications
- cross drilling helps disperse built-up heat & gasses
- front & rear available for matched appearance on all 4 corners!
- sold in axle pairs
|
Brake Parts Catalog
|
Brembo Sport Slotted Brake Rotors
|
- improve the looks & performance of your original braking system
- excellent stopping power in everyday traffic & high performance street & track driving
- designed to meet the challenges of high performance street driving & can be used with race compound brake pads at the track for driving school & lap days; not intended for high-speed track use
- compatible with OE rotor specifications
- fully compatible with hubs, brake calipers & tires
- utilize 1-piece vented or solid rotors consistent with OE specs
- machine multiple, shallow slots into disc front & rear surfaces
- slotting disperses built-up heat & gasses & refreshes the brake pad surface
- minimize cracking caused by repeated, high stress, high temperature brake applications
- front & rear available for matched appearance on all 4 corners!
- sold in axle pairs
|
Brake Parts Catalog
|
TOP  |
|
Carbon Z
Performance
Cross-Drilled
Brake Rotors
|
- increased cooling
- improved brake pad bite
- improved wet weather braking
- reduced brake fade
- no sharp edge on the chamfer due to Carbon Z's proprietary "Sinusoidal Curve"
- cross-drilled holes utilize an outer radius curve (rather than a countersink) to eliminate the sharp edge on the rotor surface
- makes the rotor more pad friendly by reducing pad wear caused by the brake pad scraping against the sharp edge
- the smooth design promotes cooling and minimizes stress, reducing the possibility of heat checking while increasing both rotor and pad life
- standard gray ZRC finish provides long-lasting protection against corrosion
- optional bright silver plating available
- limited lifetime warranty - against cracking & warping
- see Carbon Z Performance Drilled Brake Rotors for more details
|
Brake Parts Catalog
|
Carbon Z
Performance
Cross-Drilled
& Slotted
Brake Rotors
|
- the best combination of cooling and out-gassing
- maximum air circulation for increased cooling
- increased brake pad bite
- faster release of brake pad gases
- improved wet weather braking
- reduced brake fade
- no sharp edge on the chamfer due to Carbon Z's proprietary "Sinusoidal Curve"
- cross-drilled holes utilize an outer radius curve (rather than a countersink) to eliminate the sharp edge on the rotor surface
- makes the rotor more pad friendly by reducing pad wear caused by the brake pad scraping against the sharp edge
- the smooth design promotes cooling and minimizes stress, reducing the possibility of heat checking while increasing both rotor and pad life
- standard gray ZRC finish provides long-lasting protection against corrosion
- optional bright silver plating available
- limited lifetime warranty - against cracking & warping
- see Carbon Z Performance Cross Drilled & Slotted Brake Rotors for more details
|
Brake Parts Catalog
|
Carbon Z
Performance
Diamond-Slotted
Brake Rotors
|
- a unique design in slotted technology employing Carbon Z's proprietary slots & diamond slots combo
- diamond slotted design created to maximize out-gassing while maintaining the structural integrity of the rotor
- the series of slots and diamond slots "wipes" the surface of the brake pad, reducing gases which build up and cause brakes to fade at higher temperatures
- slots & diamonds machined to the minimum rotor thickness to insure rotor strength and integrity
- increased brake pad bite
- faster release of brake pad gases
- improved wet weather braking
- reduced brake fade
- standard gray ZRC finish provides long-lasting protection against corrosion
- optional bright silver plating available
- limited lifetime warranty - against cracking & warping
- see Carbon Z Performance Diamond Slotted Brake Rotors for more details
|
Brake Parts Catalog
|
Carbon Z
Performance
Slotted
Brake Rotors
|
- series of slots wipe the surface of the rotor forcing the gases to expel through the slots
- slotted surface also greatly improves wet weather braking by preventing hydroplaning between the pad and rotor
- slots are machined to the minimum rotor thickness to insure that rotors strength is not compromised
- reduced stopping distance
- increased brake pad bite
- faster release of brake pad gases
- improved wet weather stopping
- reduced brake fade for consistent repetitive stopping
- standard gray ZRC finish provides long-lasting protection against corrosion
- optional bright silver plating available
- limited lifetime warranty - against cracking & warping
- see Carbon Z Performance Slotted Brake Rotors for more details
|
Brake Parts Catalog
|
| TOP |
|
Centric Premium Brake Rotors
|
- utilize black electrocoating finish for long-lasting corrosion protection
- double disc ground, taper-free finish
- ensures parallelism, eliminates run out & provides near perfect disc thickness variation (DTV)
- leaves non-directional finish on friction surface area for more effective pad-rotor break-in
- provides quieter, smoother stops
- fully-machined finish including rotor hats provide better rotor balance
- mill-corrected to a tolerance of less than 2 oz. per inch
- center split core casting compatible with OE specifications for proper heat transfer & thermal efficiency – results in superior braking power & safety
|
Brake Parts Catalog
|
Centric
SportStop
Performance
Brake Rotors
|
see SportStop Performance section below
|
|
C-Tek Brake Rotors
|
see C-Tek section below
|
|
| TOP |
|
C-Tek Brake Rotors
|
- high quality & value
- double disc ground finish
- manufactured to OE metallurgy, fit & function specifications
- offered for a wide range of applications
|
Brake Parts Catalog
|
| TOP |
|
EBC Ultimax
Brake Rotors
(Slotted)
|
- offer quieter braking
- black anodized for protection against corrosion
|
Call
1-800-214-4034
to order
|
EBC Sport
Brake Rotors
(Drilled & Slotted)
|
- wide aperture grooves
- draw cool air across the brake pad surface keeping pads & rotors cooler
- expel dust, dirt & hot gasses better than fine slots that can fill with rust & scale, becoming ineffective
- dimple hole construction
- break down surface gasses when braking at high speeds
- maintain rotor strength & durability
- special disc alloys unique to EBC
- balanced geometry
- zinc anodized for European cars & imports
- black anodized for domestic vehicles
|
Call
1-800-214-4034
to order
|
| TOP |
|
Performance Friction Brake Rotors
(Slotted)
|
- metallurgy & mass displacement increase rotor’s resistance to heat & water fade & improve braking power (torque) & responsiveness (bite)
- machined to assure low runout & thickness variation
- slot design provides much higher brake bite
- high temperature metal alloy resists hot spots
- computer-designed vanes maximize cooling air flow & prevent thermal distortion
- one-piece rotor & two-piece floating rotors
|
Call
1-800-214-4034
to order
|
| TOP |
|
Power Slot Slotted Brake Rotors
|
- exclusive Vac-U-Slots machined into rotor
- designed to run cooler
- slots help evacuate gasses & dust, shed heat & keep the brake pad surface clean
- promote improved wet & dry brake performance
- in wet conditions, Vac-U-Slots help push water off braking surface
- serve as wear indicator
- machined to minimum thickness at rotor’s outside edge, to identify when rotor has worn to its discard depth
- military spec cadmium plating for great appearance & corrosion resistance
|
Brake Parts Catalog
|
Power Slot Cryo Slotted Brake Rotors
(Cryogenically-Treated / Slotted)
|
- cryogenically-treated Power Slot Slotted Rotors
- available on entire line of Power Slot Slotted Brake Rotors for same great advantages of a Power Slot rotor
- permanently improves performance & service level of rotor
- extra level of protection against warping & wear
- proprietary cryogenic process permanently & dramatically improves the usage life & stability
- improves tensile strength, abrasive wear resistance & longevity
- resist cracking, warping & fading
- inhibits internal oxidation & increases thermal fatigue resistance
- last up to 3 times as long as untreated rotors
- provide more predictable, consistent braking, even under extreme braking
|
Call
1-800-214-4034
to order
|
Power Slot Plus
Big Brake System
|
- premium-quality, larger diameter Power Slot brake rotor with Vac-U-Slot technology
- uses Power Slot’s patented caliper relocation brackets to relocate your vehicle’s brake caliper for increased braking effectiveness
- increases brake torque force without affecting pedal feel
- larger rotor is more effective heat sink
- absorbs heat generated under heavy braking
- reduces brake fade
- provides shorter stopping distances, especially from higher speeds
- requires use of larger diameter wheels
|
Call
1-800-214-4034
to order
|
| TOP |
|
Power Stop
Cross-Drilled
Brake Rotors
|
- drilled holes are CNC precision machined
- air flows over and through the drilled holes to effectively dissipate heat and eliminate hot spots
- run 200° cooler and prevent warping
- treated with a gold zinc dichromate finish to keep that new rotor look
- combine with performance brake pads for shorter stopping distance without fade
|
Brake Parts Catalog
|
Power Stop
Cross-Drilled
& Slotted
Brake Rotors
|
- combine cross drilled holes to effectively dissipate heat and slots to wipe away brake friction debris
|
Brake Parts Catalog
|
Power Stop
Slotted
Brake Rotors
|
- slots provide a cleaning action to wipe away brake pad debris
- slots reduce build up of friction dust and gas that gets between the pad and rotor and reduces pad bite
- silver zinc dichromate finish is highly resistant to corrosion
- recommended for racing and heavy duty application like hauling, towing and fleet use
- upgrade to Power Stop Nitro Blast Crogenically-Treated Brake Rotors for the ultimate race proven solution
|
Brake Parts Catalog
|
Power Stop
Nitro Blast
Slotted
Brake Rotors
(Cryogenically-Treated / Slotted)
|
- Power Stop's cryogenically-processed Slotted Brake Rotors
- improves wear characteristics and rotor life
- 3-step process:
- gradually freeze rotors to -300°F over a 12 to 16 hour period in a liquid nitrogen-filled cryo-processing machine
- gradually ramp up the temperature back to room temp over the next 8 to 14 hours
- metal tempering phase or heat treating - increase the temperature over a 3-hour period to as much as 1100° to improve the hardness of the rotor
- alters the crystal microstructure of the metal to enhance wear, reduce abrasion, reduce stress risers and resist metal fatigue
- recommended for cars and trucks used in fleets or commercially, towing applications and racing applications
|
Call
1-800-214-4034
to order |
| TOP |
|
Royalty Rotors
Slotted & Cross Drilled
Brake Rotors
|
- cross-drilled holes - degasses brake pads & decreases rotor heat
- curved slot design - deglazes brake pads, reduces fade & minimizes brake dust
- silver zinc plating - prevents rust & corrosion & greatly improves appearance
|
Call
1-800-214-4034
to order
|
| TOP |
|
SportStop Performance
by Centric
Slotted
Brake Rotors
Drilled & Slotted Brake Rotors
Cross-Dilled
Brake Rotors
|
- a bolt-on performance brake upgrade
- offer better heat & gas dissipation for improved stopping power & pedal feel
- designed to run cooler & promote improved wet & dry braking performance
- Slotted:
- specially-designed, directional slots remove gasses from in between the brake pad & rotor
- reduces temperature & increases brake performance
- Drilled & Slotted:
- add countersunk holes that reduce stress risers & fractures
- pulls more gas & heat away from the friction surface to improve performance
- more surface area than conventional cross-drilled rotors for better structural integrity
|
Brake Parts Catalog
|
| TOP |
VIEW CART
BUY BRAKES